MOD Reverb Tanks / MOD-9FB2A1C Reverb Tank
BACK
All prices contained on this page are exclusive of VAT. This is currently charged at 20% and is payable by the UK only.
Specifications:
Solid, Sturdy Construction
Long (16 3/4 ") 3 Spring Unit, Medium Decay (1.75-3.0 seconds)
Input Impedance 1,925 Ohms, Output Impedance 2,575 Ohms
Connectors: Input Grounded/Output Grounded
Mounting: Vertical/connectors up
9FB2A1C is the reverb tank that is used by Marshall in the 2205, 2210 series and some
Select Fender, Peavey, Music Man amplifiers
The MOD Reverb Tanks are high-quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks. In addition, very close attention has been paid to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone.
All prices contained on this page are exclusive of VAT. This is currently charged at 20% and is payable by the UK only.
The MOD Reverb Tanks are a range of high quality upgrade units made to vintage Accutronics specification.
MOD tanks differ from other reverb tanks by the fact that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. Made just like the original Hammond Accutronics tanks from the 1960s. They offer very close attention to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone. These are considered to the best sounding units on the market.
Mod Reverb Tank for 9FB2A1C Specifications:
Solid, Sturdy Construction
Long (16 3/4 ") 3 Spring Unit, Medium Decay (1.75-3.0 seconds)
Input Impedance 1,925 Ohms, Output Impedance 2,575 Ohms
Connectors: Input Grounded/Output Grounded
Mounting: Vertical/connectors up
9FB2A1C is the reverb tank that is used by Marshall in the 2205, 2210 series and some
Select Fender, Peavey, Music Man amplifiers
The MOD Reverb Tanks are high-quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks. In addition, very close attention has been paid to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone.
Comments
Specials
-
EL34/EL34B STR-TAD SPECIAL OFFER
Special Offer 15% Discount
The TAD EL34B STR has been around for many years now and this valve has a number of ...
£22.00£18.70 -
EL84-SOVTEK
Special Offer 20% Discount Limited Stock
The Sovtek EL84 has been the industry standard go to EL84 for over 25 ...
£24.00£19.20 -
GZ34/5AR4-SOVTEK
Special Offer 15% Discount
The Sovtek GZ34 5AR4 a very well made modern full wave rectifier. The valve uses ...
£32.00£27.20 -
211-PSVANE CLASSIC SERIES
Special Offer 15% Discount<>br>
Psvane 211 Classic Series is a directly heated audio power triode for High end Audio ...
£115.00£97.75 - EF86-HARMA RETRO£
26.00£23.40 - Bugera 6262 Infinium£
254.00£228.60 - Way Huge WM22 Smalls£
132.50£119.25



Valves
Cryo Valves
Kits
Speakers
Pedals
Amp Parts
Cabinets
Accessories
Tweet